[[tools]]  

====Kleenkutter====

There is a product called [[http://www.kleenkutter.com/home.asp|Kleenkutter]] which is getting a lot of good feedback from our site [[http://www.roofing.com|Roofing.com]].

It is a product of **Core Tech Tools Inc**, which is located in South Central Oklahoma. They responded to the problem of coming up with a quality, precision metal cutting tool. Their answer to  this is the product, Kleenkutter which is Portable Circular Saw System which weighs 140 lbs that comes with standard equipements like:
  * Dolly system for transport
 
  * Four(4) linear bearings

  * One(1) pivot bearing

  * Upper and lower arm Assembly w/ crank and arm

  * Two(2) guide pins

It can cut through many [[http://www.kleenkutter.com/materials/materials.asp|materials]] including, Snap-loc, hurricane panels, R panels, Vertical seams, etc.

What sets it apart from other systems is that is quite easy to use without sacrificing accuracy and safety. It is easy to set up and pack up. The entire process of setting it up and packing it up takes only around 5 minutes.

It also reduces chances of having injuries and it produces lesser noise compared to other systems.

It also allows to cut angles up to 70+ degrees which can save on cost and labor due to lesser material waste and increased speed and accuracy.

Only one blade is needed for all angles and the only other tool you will need with this system is a worm drive circular saw with a 7 1/4" or a 8 1/4" blade for deeper cuts.

The Kleenkutter system has a one year parts replacement and craftsmanship warranty provided you are the original owner. 

For more information on this product, just visit their site [[http://www.kleenkutter.com|Kleenkutter]]